Shrink Tunnel
ST-Series | SKU: ST-1808
The ST-1808-Series Shrink Tunnel is a great general purpose entry level shrink tunnel which can be used for a wide variety of applications: laying bottles down, using full length PVC shrink sleeves, shrinking pre-form shrink bands over containers, using regular cut shrink bands, using as curing or drying tunnel. This tunnel features a fully re-circulating chamber with air flow coming from all four sides to provide the best shrink results and a live roller rod conveyor. This feature is normally only found on much more expensive tunnels. AC variable speed drive with digital temperature control 0-400F.
FEATURES
Full re-circulating shrink tunnel
Live roller rod conveyor provides best shrink results
Digital temperature control 0-400F
Adjustable air velocity control
State of the art AC variable speed conveyor 0-75FPM
Chromed conveyor rollers and shaft (no rust)
Automatic tunnel cool down and shut off
Sealed bearings on drive and idler shafts
Quietest tunnel on the market
Heats up to 300F in less than 15 minutes
Thermal overload protection on all motors
Anti-jam safety feature on conveyor
Chamber sizes: 18"W x 8"H x 28"L and 18"W x 8"H x 44"L
Longer chamber length (44") for faster and better shrinking
Can pair with our SS-1622 L-Bar sealers
1-year warranty
Unit ships via LTL freight only. Call for freight rates
OPTIONS
12" or 16" tunnel opening
Close roller spacing 1/2" gap
PTFE mesh belt kit
Stainless steel metal mesh belt
Falcon belting
Specifications:
Power | Weight (lbs) | Tunnel Dim | Speed | Blower Motor | Heater Bank | |
---|---|---|---|---|---|---|
ST-1808-28 | 220V, 40Amps | 450 | 28" x 18" x 8" | 0-75FPM | 1/2 HP | 7.5KW |
ST-1812-28 | 220V, 40Amps | 470 | 28" x 18" x 12" | 0-75FPM | 1/2 HP | 7.5KW |
ST-1808-44 | 220V, 40Amps | 450 | 44" x 18" x 8" | 0-75FPM | 1 HP | 9KW |
ST-1812-44 | 220V, 40Amps | 470 | 44" x 18" x 12" | 0-75FPM | 1 HP | 9KW |
ST-1816-44 | 220V, 40Amps | 495 | 44" x 18" x 16" | 0-75FPM | 1 HP | 9KW |